Kuraki KBT-10DX Horizontal Boring Mill (1996)

Description 

Spindle Diameter: 3.94"
Spindle Taper: ISO No. 50
Spindle Speeds (3 Step Gear Change): 5-2000 RPM
Spindle Head Vertical Travel (Y): 39.37"
Table Longitudinal Travel (X): 59.06"
Table Cross Travel (Z): 31.5"
Spindle Center to Table Surface: 0-39.37"
Spindle Axial Travel (W): 19.69"
Table Size: 37.40" x 43.31"
Automatic Table Indexing: .001 DEGREE
Feed Rate (X, Y, Z & W): 0.04-157.48 IPM
Rapid Traverse - X, Y & Z: 472.44 IPM
W: 236.22 IPM
Rapid Table Rotary Speed: 1.2 RPM
Spindle Motor: AC 15 HP
Feed for X, Y, Z & W Axis: AC 4.0 HP
Table Rotation: AC 2.4 HP
Hydraulic Pump Motor: AC 2.0 HP
Spindle Lubrication: AC 0.13 HP
Slide Ways Lubrication: AC 0.08 HP
Spiral Chip Conveyor: AC 0.53 HP
Electric Power Source
Voltage: AC200/220V +/- 10%
50/60 HZ +/-1%
Capacity: 40 KVA
Machine Height: 129.92"
Floor Space: 183.07" x 151.57"
Machine Weight: 25,960 lbs
Machine Dimensions: (L x W x H) 15ft x 9ft x 11ft 

Equipped With

Flood Coolant,
Coil Type Chip Conveyor,
Spindle Oil Cooler,
Chip Cover For Slide Way,
Spindle Speed Meter & Load Meter,
Programmable Index at .001 Degree with Location Pin at 90 Degrees,
Manual Pulse Generator,
Power Shutoff Device,
Manual Spindle Setting Device,
Monolever Type Jog Feed,
Self Diagnosis Function,
Door Interlock on EC Box,
Control: Fanuc Series 15-M