Wayne Trail/ VIL Flexlase Universal Laser Processing Cell Welding Cell (2010) 
- Lot # 2
- System ID # 3969335
- End Date Central Standard Time
- Start Date Central Standard Time
- Item # 3969336
Wayne Trail/ VIL Flexlase Universal Laser Processing Cell Welding Cell (2010)
Description
Laser System: 8 KW IPG Rfiber Ytterbium fiber laser with 100 µm core fiber
Cooling: IPG/Riedel PC 250 chiller
Beam Switch: 2-way internal beam switch with process fiber (200 µm)
Control Interface: Allen Bradley Panelview Plus 1250 touchscreen
Robotic Arm: ABB IRB 4400
Robot Controller: IRC5
Robot Capacity: 100lb load capacity, 124-inch spacing between head/tail stock, swing diameter 28 inches
Robot Track: Approximately 8-foot linear track with rack and pinion, linear rails included
Welding Head: Precitec YW50 model with 100mm collimator, 300mm focal length, 600 µm spot size
Monitoring: Precitec LWM weld process monitor
Seam Tracking: Precitec LPF seam tracker with camera and controller
Cable Management: Kabelschlepp 'Robotraxx' system for electrical, fiber optic, pneumatic, gas, and water hoses
Safety Enclosure: Class I laser safety system with interlocks, safety mats, and emergency stops
Safety Features: Door interlocks, perimeter safety pull cords, lockable access doors, motion sensors
Fume Extraction: Donaldson/Torit T2000 integrated fume evacuation system
Power Requirements: 480V, 3-phase, 150 Amp; estimated 35 CFM @ 90 PSI for gas management system
Equipped With
Robot Arm- ABB440, Controller- ABB IRC 5, Chiller- IPG/Riedel PC 250 chiller, Welding Head- Precitec YW50, Fume Extractor- Donaldson/Torit T2000,