Harrison M 550 GH Engine Lathe W/ DROs (2001)

Swing Over Bed (inch) 21.81
Swing Over Cross slide (inch) 14.57
Swing in Gap (inch) 32.68
Distance Between Centers (inch) 80"
Bed Width (inch)  15.75
Spindle Bore(inch)  3
Spindle Nose (camlock)  D1-11
Spindle Nose Taper 5 MT
Spindle Speed RPM Range  18-1800
Chuck Size 15.5"
Cross Slide Travel (inch) 11.81
Width of Cross Slide (inch) 8
Top Slide Travel (compound) (inch) 7.5
Tailstock Quill Diameter (inch) 3.74"
Tailstock Quill Travel (inch) 5.7
Tailstock Quill Taper 6 MT
Longitudinal Feed Range (in/rev)  0.0016 – 0.11
Cross Feed Range (in/rev)  0.0008 – 0.055
Number of Inch Pitches  73
Range of Inch Pitches  2 - 84
Number of Metric Pitches  51
Range of Metric Pitches: 0.2 - 14
Number of Diametral Pitches 27
Range of Diametral Pitches 8 - 72
Number of Module Pitches  27
Range of Module Pitches  0.2 – 3.5
Voltage Required  230/460 Phase 3
 

Equipped with:

2-Axis Accurtie Digital Read Outs
15 1/2" Chuck-3-Jaw
IN/MM Threading
Tailstock
Tool Post
Coolant

Machine Foot Print (LxWxH) (inch)180 x 63 x 57*
Machine Weight (lbs.)7,942